|
This
adapter allows the microphone to function as an acoustically tailored
"boundry-type" microphone by using the reflective surface
of a table or desk as the boundary area that the microphone picks
up. This allows the user to hear everyone sitting around the table,
eliminating the need to pass around a microphone.
The
TM-10 has been specially designed to maximize the high fidelity
performance of the AT-216 by emphasizing the frequencies that enhance
speech clarity.
|
Simple
To Use:
Remove
the windscreen and tie-clip from the CM-183 lapel microphone
and insert the microphone into the receptacle on the TM-10
adapter. This allows the microphone to function as a highly
efficient conference table microphone. Place the unit in the
middle of a table or desk so that everyone can easily be heard.
|
|
TM-10
Technical Specifications
(With
CM-183 Microphone)
| Frequency
Response: |
100
to 10,000 Hz. |
| Polar
Pattern: |
Hemispherical
over boundary. |
| Output
Impedance: |
1
k ohms nominal. |
| Sensitivity: |
-28
dB at 1 kHz, ref. 1 volt. |
| Equivalent
Output Noise: |
23.5
dB (A-weighted). |
| Max
SPL (1 kHz): |
128
dB with 10 K load. |
| Phantom
Power Voltage: |
3
to 9 VDC. |
| Dimension: |
2
in. diameter (50.8 mm).
.640 in. high (16.25 mm). |
| Weight: |
1.33
oz (38 grams) with microphone. |
|
